Maxtor MaxAttach NAS 6000 Quick Start Card

MaxAttach NAS 6000
Quick Start Card
This Quick Start Card is only for a single MaxAttach NAS 6000 Base Unit
enclosed within a cabinet or a single rack-mountable Base Unit. For other
configurations, see the MaxAttach NAS 6000 Installation and Configuration Guide
on the enclosed MaxAttach NAS 6000 Installation and Documentation CD.
Welcome to the
MaxAttach NAS 6000
Thank you for choosing a MaxAttach NAS
6000 system. Take a moment to verify the
contents in your box and note the model
and serial numbers for future reference.
The procedures outlined here assume that
you have purchased a MaxAttach NAS
6000 Base Unit system enclosed within a
cabinet, or a rack-mountable MaxAttach
Base Unit system, and that you are highly
familiar with networking and system
administration basics. If not, please refer to either the appropriate Getting Started
Guide based on your system's configuration, or the Installation and Configuration
Guide on the enclosed CD.

Box Contents

Equipment:
n
MaxAttach NAS 6000 file server (with rack mount hardware if required)
n
EMU/CPU Serial Cable (for rack mount systems)
n
Two AC power cords
Revision 2.0.03A
MaxAttach NAS 6000
Quick Start Card
1 000001576