MaxAttach NAS 6000 Administration Guide
9:
DECISION POINT - Are there Expansion Units to Install?
If your system has only a single Base Unit, skip ahead to Step #13 - Install
n
Network and AC Power Cables on page 9 below.
If you system has a Base Unit and one or two Expansion Units, to continue
n
with the step immediately below.
10:
EMU Cable Between Base Unit and First Expansion Unit
1.
Install the Base Unit to First Expansion Unit EMU Cable
Longer M/F serial cable.
n
Start at the Base Unit EMU EXT2 port.
n
Connect to EMU EXT1 port on the first Expansion Unit.
n
11:
DECISION POINT - One or Two Expansion Units
If your system has only a single Base Unit, skip ahead to Step #13 - Install
n
Network and AC Power Cables on page 9 below.
If you system has a Base Unit and two Expansion Units, to continue with the
n
step immediately below.
12:
EMU Cable Between First and Second Expansion Unit
2.
Install first Expansion Unit to second Expansion Unit EMU cable.
Longer M/F serial cable.
n
Start at first Expansion Unit EMU EXT2 port.
n
Connect to EMU EXT1 port on the second Expansion Unit.
n
3.
Your EMU cabling is complete.
There is no terminator on the last EMU EXT2 port.
Chapter #1 - Installation - Rack Mounting Your NAS 6000
11/07/01 -- Revision 2.0.03A
NOTE
Chapter #1 - Installation - Rack Mounting Your NAS 6000
1: User-Supplied Materials and Services
8
000001628