MaxAttach NAS 6000 Administration Guide
To configure Web (HTTP) sharing properties
1.
On the primary navigation bar, choose Shares.
2.
Choose Sharing Protocols.
3.
Select HTTP Protocol, and then choose Properties.
4.
Choose to allow all IP address to access data shares on the server appliance, or select a
single IP address from the list.
5.
Type the port number that can be used to access data shares on the appliance. The
default port number is 80.
NetWare Sharing Protocol
Setting NetWare Sharing Protocol
You can use the NetWare sharing protocol to share volumes on your server appliance
powered by Microsoft® Windows® with NetWare clients.
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
Related Topics
•
For more information about HTTP, see Web (HTTP).
For more information about HTTP share properties, see
Web (HTTP) Sharing.
•
Adding a Share
•
Removing a Share
•
Modifying Share Properties
•
Setting Windows (CIFS) Sharing Properties
•
Setting NFS Sharing Properties
•
Setting FTP Sharing Properties
•
Setting Web Sharing Properties
•
Setting NetWare Sharing Properties
•
Setting AppleTalk Sharing Properties
Related Topics
•
Setting Windows (CIFS) Sharing Properties
•
Setting NFS Sharing Properties
Chapter #8 - O/S 2.0 - Folders and Shares
220
NetWare Sharing Protocol
000001628