MaxAttach NAS 6000 Administration Guide
13:
Install Network and AC Power Cables
In this section, you will connect your Network Interface Cards (NICs) to your network
hub with user-supplied NIC cables. You will also connect the AC power cords to the
equipment shelves and connect them to user-supplied AC power strips.
Network Connections
Connect the appropriate NIC cables as follows:
1.
Between each NIC and network hub or ports.
2.
At least one network connection is required.
3.
You can also add a network connection from the CPU I/O panel network port to
Chapter #1 - Installation - Rack Mounting Your NAS 6000
11/07/01 -- Revision 2.0.03A
Chapter #1 - Installation - Rack Mounting Your NAS 6000
1: User-Supplied Materials and Services
9
000001628