MaxAttach NAS 6000 Administration Guide
statements are preloaded into the cache at system startup time and are not accessed later.
Remember that comment lines add to parsing time because each line is processed
individually.
To edit the LMHOSTS file
1.
From the primary navigation bar, choose Network.
2.
Choose Global Settings.
3.
Select the NetBIOS LMHOSTS tab.
4.
Select the Enable LMHOSTS lookup check box.
By default, the box below the check box contains the current LMHOSTS file
n
configuration; however, if there are no entries to be seen, the box will be
empty.
5.
Edit the LMHOSTS file by clicking in the box and changing the information.
6.
Choose OK.
IPX Settings
Internetwork Packet Exchange (IPX) is the native NetWare protocol used on many earlier
Novell networks.
To be accessible from clients running NetWare, your server appliance must provide an IPX
address.
To configure the IPX address
1.
From the primary navigation bar, choose Network.
2.
Choose Global Settings.
3.
Select the IPX Settings tab.
4.
Enter a value in the Internal network number box, or leave the parameter's default
value at 00000000.
5.
Choose OK.
Chapter #5 - O/S 2.0 - Network Configuration
11/07/01 -- Revision 2.0.03A
Chapter #5 - O/S 2.0 - Network Configuration
144
IPX Settings
000001628