Sensor Alarm Settings - HIKVISION DS-7200HVI-ST User Manual

9. Select cameras to trigger for recording when motion is detected by checking the checkboxes under the
desired cameras.
10. Select the Schedule tab. Set the schedule you want motion detection to be enabled. Schedule can be set
for all week or any day of the week with up to 8 time periods per day.
Note:
After having configured the schedule, the DVR must be restarted for the new settings to take effect.
Figure6. Schedule Settings
11. Select the Handle tab to configure exceptions handling. Exception trigger options will be described in
the next section (See Understanding Exception Trigger Options).
Figure7. Handle Settings
12. Click OK to complete motion settings for the selected camera.
You may now add a schedule to start recording when motion is detected (See Scheduling a Recording).

Sensor Alarm Settings

Recordings can also be triggered from an external relay alarm device. To set up sensor alarms:
1. Click Menu > Settings > Alarm to enter the Alarm Settings menu, shown in Figure 8.
54