Configuring Live View Settings - HIKVISION DS-7200 User Manual

User Manual of DS-7200/7300/8100 Series DVR

3.3 Configuring Live View Settings

Purpose:
Live View settings can be customized according to different needs. You can configure the output interface,
dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
The settings available in this menu include:
Video Output Interface: Select the output to configure the settings for. The following interfaces are
selectable: VGA/HDMI, Main CVBS and Spot Output 1.
The Spot Output 1 is provided for DS-7300 and DS-8100 models.
Live View Mode: Select different window-division mode from the drop-down list.
For the DS-7232, DS-7332 and DS-8132 models, 1/4/6/8/9/16/25/36-division window display modes are
supported; for the DS-7224, DS-7324, DS-8124 and 16-ch HDVR models, 1/4/6/8/9/16/25-division window
display modes supported; and for other models, 1/4/6/8/9/16-division window display modes are supported.
Dwell Time: The duration between switching of channels when enabling auto-switch in Live View.
Enable Audio Output: Enable/disable audio output for the selected video output.

When the VGA/HDMI output interface is used as the main video output and the Audio Output for the
VGA/HDMI output interface is enabled, the VGA/HDMI audio and AUDIO OUT can be used for live
view, playback and two-way audio.

When the VGA/HDMI output is used as the main video output and the Audio Output for the
VGA/HDMI output interface is disabled, the VGA/HDMI output provides no audio and the AUDIO
OUT is used for two-way audio.

When the CVBS output is used as the main video output, the VGA/HDMI audio is provided for Aux
video output in live view, and the AUDIO OUT is used as the main video output(for live view, playback
or two-way audio).
Event Output: Select the output to show event video. The following interfaces are selectable: VGA/HDMI,
Figure 3. 7 Live View-General
48