Adjust The Volume - CyberData 930112A Operation Manual

12 Installing the VoIP Loudspeaker Amplifier

2.2.6 Adjust the Volume

To adjust the loudspeaker amplifier volume, turn the Volume dial
amplifier face.
CyberData Corporation
2. Release the switch to hear the IP address announcement, and check the loudspeaker amplifier
volume.
Caution
Equipment Caution: Pressing and holding the RTFM switch for longer than
20 seconds will restore the loudspeaker amplifier to the factory default
settings. See Section 2.5, "Restore the Factory Default Settings"
Figure 2-8. Volume Control
930112A VoIP Loudspeaker Amplifier Operations Guide
.
(Figure 2-8) on the loudspeaker
Volume control