CyberData 930112A Operation Manual page 26

20 Installing the VoIP Loudspeaker Amplifier
Web Page Item
SIP Server*
Remote SIP Port*
Local SIP Port*
SIP User ID*
Authenticate ID*
Authenticate Password*
SIP Registration*
Unregister on Reboot*
Register Expiration*
CyberData Corporation
2. On the SIP Setup page, enter values for the parameters indicated in
3. After changing the parameters, click Save Settings.
Table 2-11. SIP Setup Parameters
Description
Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Enter the Remote SIP Port number (default is 5060).
Enter the Local SIP Port number (default is 5060).
Enter the SIP User ID (up to 30 alphanumeric characters).
Enter the Authenticate ID (up to 30 alphanumeric
characters).
Enter the Authenticate Password (up to 30 alphanumeric
characters).
Enable/Disable SIP Registration.
• Select Yes to automatically unregister the paging
amplifier when it is rebooted.
• Select No to keep the paging amplifier registered when it
is rebooted.
Enter the SIP Registration lease time in minutes (default is
60 minutes).
Click on this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Link to the Speaker Setup page.
Link to the Network Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
930112A VoIP Loudspeaker Amplifier Operations Guide
Table 2-11.