Confirm Operation - CyberData 930112A Operation Manual

10 Installing the VoIP Loudspeaker Amplifier

2.2.4 Confirm Operation

After connecting the loudspeaker amplifier to the ethernet hub, use the LEDs on the loudspeaker
amplifier face to confirm that the loudspeaker amplifier is operational and linked to the network.
CyberData Corporation
Figure 2-5. Loudspeaker Amplifier LEDs—Power and Link
Figure 2-6. Loudspeaker Amplifier LEDs—Status and Activity
LED Color
Power Blue/Green
Status Green
Link Green/Yellow
Table 2-6. Loudspeaker Amplifier LEDs
Function
The power LED is illuminated a steady
on and blue/green when the amplifier is in the high power mode.
After supplying power to the loudspeaker amplifier:
1. The green Status LED illuminates after approximately five
seconds to indicate the start of the firmware verification and load
process.
2. After approximately 15 seconds, the Status LED begins to
blink at one second intervals to indicate the start of the firmware
boot process.
3. After approximately 35 seconds, the loudspeaker amplifier
beeps once to indicate that it is operational.
4. The Status LED will continue to blink at one second intervals
to indicate normal operation.
The Link LED is illuminated
yellow/green for a 100Mb link when the network link to the
loudspeaker amplifier is established.
930112A
Power LED (blue/green)
Link LED (green/yellow)
Status LED (green)
Activity LED (green)
blue when the power is
green for a 10Mb link or
VoIP Loudspeaker Amplifier Operations Guide