Travis Industries 33 DVI Owner's Manual page 36

36
Optional Equipment
5 Follow the directions below to replace the orifices.
1/2" Wrench
Front Burner Orifice
6 Install the new manifold cover included in owner's pack (see illustration below).
© Travis Industries
Rear Burner Orifice
Use a 1/2" open end wrench
a
to unscrew the two orifices.
c
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
15/16"
24mm
(for qualified installers only)
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Look here for the orifice identification
NG
#49
Front
Rear #43
4100322
b
LP
#57
#53
100-01237_000