Travis Industries 33 DVI Installation Instructions Manual

Cypress stone set
Hide thumbs Also See for 33 DVI:

Advertisement

Quick Links

Packing List

Steel Template
Pilot Cover Rock (has cut-out on bottom of rock)
Pilot Shield Rock (has two holes on bottom of rock)
(16) Standard Rocks (has one hole on bottom of rock)

Installation Warnings

The rocks are fragile, especially after being exposed to heat.
Make sure the gas control valve is "OFF" and the heater is cool prior to conducting service.
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage or personal injury.
The burner must be correctly positioned before installing the rocks. Make sure the burner is fully seated
and the pilot is properly aligned. See owner's manual for details on burner removal.
HINT: If using propane (LP), convert the appliance before installing the rocks.
HINT: If using optional firebacks, first make the modifications to the burner (see below). After modifying the
burner install the firebacks then the stones

Preparing the Burner for Rock Installation

The log set requires the burner to be modified. Remove the two screws holding the ember trays in place (see
below). Remove the ember trays.
Page 1 of 8
33 DVI / Cypress Stone Set
Installation Instructions
17601619 - 11/16/10
(sku 94700733)
Platinum Crushed Glass (in 2-portion bag)
Bronze Crushed Glass (in 2-portion bag)
Cobalt Crushed Glass (in 2-portion bag)
© Travis Industries, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 33 DVI and is the answer not in the manual?

Questions and answers

Summary of Contents for Travis Industries 33 DVI

  • Page 1 33 DVI / Cypress Stone Set Installation Instructions (sku 94700733) Packing List • • Steel Template Platinum Crushed Glass (in 2-portion bag) • • Pilot Cover Rock (has cut-out on bottom of rock) Bronze Crushed Glass (in 2-portion bag) •...
  • Page 2 33 DVI / Cypress Stone Set Installation Instructions (sku 94700733) Preparing the Burner for Rock Installation (continued) Remove the two screws holding the burner in place (see below). Grasp the burner with both hands and lift it straight up and out of the firebox. Place the burner on a suitable work surface.
  • Page 3 33 DVI / Cypress Stone Set Installation Instructions (sku 94700733) Preparing the Burner for Rock Installation (continued) Cypress Only Remove and discard the pilot shield. Remove and discard the front log spacer. Page 3 of 8 17601619 - 11/16/10 © Travis Industries, Inc.
  • Page 4 33 DVI / Cypress Stone Set Installation Instructions (sku 94700733) Preparing the Burner for Rock Installation (continued) Remove and discard both rear log supports and rear air deflector. Replace the burner, making sure it is correctly positioned. Cypress Only Remove and discard the fireback shelf/high deflector and install the low deflector (included with the Cypress stove).
  • Page 5 33 DVI / Cypress Stone Set Installation Instructions (sku 94700733) Steel Template Installation The template is shipped with the small tabs bent up. Bend the two large tabs up 90° (see pictures below). Place the template over the burner as shown below. Note how the template fits over the pins on the burner.
  • Page 6 33 DVI / Cypress Stone Set Installation Instructions (sku 94700733) Pilot Cover Rock and Pilot Shield Rock Installation There are two unique rocks included with this rock set. One rock covers the pilot, the other shields it. Follow the directions below to install these rocks.
  • Page 7 33 DVI / Cypress Stone Set Installation Instructions (sku 94700733) Rock Installation The remaining rocks may now be placed on the burner so the hole on each rock inserts over the pins on the burner. Start with the rocks to the left of the pilot, working your way clockwise around the burner (see photos below).
  • Page 8 Three colors of crushed glass are included with this set to allow for different shading options. Each color of glass comes in a two-portion bag (labeled “A” and “B”) to accommodate the differences between the 33 DVI and Cypress burner.

Table of Contents