Key Lock, Pin Code Lock Reset - Eiki EK-350 Series Service Manual

Key lock, PIN code reset
This projector provides Key lock and PIN code lock and LOGO PIN code lock ensure your projector's operation
safety. Only when users enter the correct password can you open your projector when you has set up the three
security fea- tures.You won't start the projector without password. In case of the above issues, please reset such
three security features according to the following reset procedure, and then re-check.
Function
Key lock
PIN code lock
Logo PIN code lock
If forget all password, thus please following the steps to reset the PIN lock or
Logo PIN lock:
1. Un-plug the projector
2. Press and
3. The unit will be reseted to defult password: 111
Set up it on the top panel or remote controller.
Select the Key lock function will make you unable to
power on your projector .
Initial setup: Key lock off
Prevent unauthorized personnel from operating your
projector.
Initial Password: 111
Prevent unauthorized personnel from changing
the Logo.
Initial Password: 111
(Power) button at same time then plug on AC power cord.
Description
-8-