Table of Contents
Advertisement
MENU
PIN Key In Operation
When the projector is turned on and the
PIN LOCK PROTECTION is set to [ON],
the image will show as on the right side.
1. Press the MENU button on the projector
or remote control. Enter PIN code by
keypad or remote control.
2. How to enter a PIN code?
You can use control panel or remote
control.
CONTROL PANEL
KEYSTONE
VOL -
INPUT
MENU
Refer to photo below to enter a sequence of PIN code by control panel or remote control buttons.
(1) Press ◄ button: Select the [ 1 ]
(2) Press ▲ button: Select the [ 2 ]
(3) Press ► button: Select the [ 3 ]
(4) Press ▼ button: Select the [ Enter ] move to next row.(4~6,7~9,
(5) Press
(backspace) item:
In case you enter a wrong digit, select
(6) Press
(backspace) item:
Once all four digits of the PIN are entered, select
NOTE
(1) Please enter: 0000 for first-time use.
(2) If the PIN is incorrect, a ' Enter new code " message will be shown. Please try again. If the PIN
code input is incorrect for three times, a warning message will show up and the projector will
shut itself down in 30 seconds.
(3) If you have no idea about the PIN, please contact your dealer for help.
REMOTE CONTROL
VOL+
to delete the wrong digit you entered.
to confirm.
33
The control panel and remote control buttons to
enter a sequence of PIN code is like the photo
below.
~OK)
Advertisement
Table of Contents
