Rear View - Eiki EK-623UW Owner's Manual

Rear View

Item Label
1 3D SYNC IN
2 LAN
3 HDBaseT
4 3D SYNC OUT
5 HDMI IN
(HDMI1 / HDMI2)
6 DVI-D
7 VGA IN
8 Remote IN
(R/C IN)
9 VGA OUT
10 RS-232C
11 Power Switch
12 AC Input
13 Kensington Lock
14 Security Bar
15 Built-in Keypad
Note:
• To use this feature, you must plug in the power adapter/cable/cord before turn on/off the projector.
• Do not use this jack for anything other than intended use.
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
2 3 4
1
15
Connect 3D SYNC IN cable from your PC or other applicable
device.
Connect a LAN cable from Ethernet.
Connect a RJ45 Cat5/Cat6 Ethernet cable to input
uncompressed high-definition video control signals.
Connect the 3D IR glasses transmitter
(Note: For Specific 3D IR glasses only)
Connect the HDMI cable from a HDMI device.
Connect to DVI source.
Connect the VGA cable from a computer or component device.
Connect to the remote control wired terminal for serial control
projector.
Connect the VGA cable to a display.
Connect RS-232 serial port cable for remote control.
Switch the power button to turn on/off the power source.
Connect to the supplied power adapter.
Use to secure the projector to countertops, tables, etc.
Use to secure the projector.
Control the projector.
—
DLP Projector — Owner's Manual
5 6 7
14 13 12
Description
3
—
8
9
10
11
See page
-
-
-
-
-
-
-
-
12
12
54
-
4