WisyCom MPR30-IEM User Manual page 17

The frequencies of all the
channels and groups is
equal to the lower
frequency of the receiver
(according to the receiver
470 MHz for MPR30-IEM-N
566 MHz for MPR30-IEM-M)
Configuration mismatch
If a problem not listed in the above table occurs or if the problem cannot solved with the
proposed troubleshooting, please contact support service at
sales@wisycom.com.
Error in the channel memory during the
initialization phase.
Error in the parameter memory
if the error code 85 appears on
the errors list:
- load a new frequency file
(wdf) in the frequency memory
of the receiver and
- contact Wisycom for more
information
if the error code 86 appears on
the error list:
- load a preset configuration
using Preset menu and
- contact Wisycom for more
information
support@wisycom.com or
16