Pci-X Expansion Board - HP ProLiant DL145 User Manual

Hardware Options Installation

PCI-X Expansion Board

The server has one PCI-X expansion slot.
To install an expansion board:
1. Power down the server. Refer to "Powering Down the Server" in Chapter 2, "Server
Operations."
2. Extend the server from the rack. Refer to "Extending the Server from the Rack" in
Chapter 2, "Server Operations."
3. Remove the access panel. Refer to "Removing the Access Panel and the Chassis
Stiffener" in Chapter 2, "Server Operations."
4. Remove the PCI-X riser cage.
Figure 4-24: Removing the PCI-X riser cage
4-16
CAUTION: To avoid risk of damage to the system or expansion board, remove the AC power
cord before installing or removing an expansion board. With the front panel Power button in
the off position, auxiliary power is still connected to the expansion slot and may damage the
board.
HP ProLiant DL145 Server User Guide