HP ProLiant DL145 User Manual page 50

Hardware Options Installation
4. Insert the drive, connect the power cable, and secure the drive.
Figure 4-30: Securing the first SCSI drive
NOTE: If installing only one drive, proceed to the "Installing the SCSI controller" section.
IMPORTANT: When installing a SCSI device in the left drive, always connect the short power cable.
5. Set the right drive SCSI address to 1.
6. Mount the SCSI drive on the drive tray.
Figure 4-31: Mounting the second SCSI drive
NOTE: Verify connector orientation before attaching.
4-20 HP ProLiant DL145 Server User Guide