HP ProLiant DL145 User Manual page 66

Boot
Table 5-5 describes the menu items available on the Boot screen. Seven menu items exist on
this screen. Each of these items contains submenus that in turn can also lead to subsequent
submenus. Default values are shown.
NOTE: Setting wrong values in submenus below may cause the system to malfunction.
Table 5-5: BIOS Setup Boot Screen Menu Items
Primary Menu
Item
Boot Settings
Configuration
Boot Device
Priority
Hard Disk
Drives
ATAPI
CDROM Drives
HP ProLiant DL145 Server User Guide
Sub Menu Items
Quick Boot
Bootup Num-Lock
PS/2 Mouse Support
Typematic Rate
Wait for 'F1' if Error
Restore on AC/Power Loss
Absent Keyboard Error
Onboard NIC
Onboard NIC PXE Option ROM
st
1 Boot Device
nd
2 Boot Device
rd
3 Boot Device
th
4 Boot Device
st
1 Drive
st
1 Drive
Operating System Installation and Software
Default Value Description
Enabled
On Select power-on state
for NumLock.
Enabled
Fast Select keyboard
typematic rate.
Disabled Wait for F1 key to be
pressed if error occurs.
Last State
Warning Information only
Enabled
Enabled
Specifies the boot
device priority sequence
Broadcom MBA
Broadcom MBA
PM-Maxtor Information only
6Y080L0
SS-DV-28E-B Information only
5-11