HP ProLiant DL145 User Manual page 63

Operating System Installation and Software
Advanced
Table 5-3 describes the menu items available on the Advanced screen. Seven menu items
exist on this screen. Each of these items contains submenus that in turn can also lead to
subsequent submenus. Default values are shown.
Table 5-3: BIOS Setup Advanced Screen Menu Items
Primary Menu
Item
IDE
Configuration
EMS Console
Configuration
Event Log
Control
5-8
Sub Menu Items
OnBoard PCI IDE
Controller
Primary IDE Master
Primary IDE Slave
Secondary IDE
Master
Secondary IDE Slave
EMS Remote Console
Serial Port Address
Serial Baud Rate
Terminal Type
View Event Log
Mark all events as
read
Clear Event Log
Event Log Statistics
Default Value Comments
Both
N/A
N/A
You cannot change these values.
They appear for informational
N/A
purposes only
N/A
Disabled This option must be enabled for
Windows EMS management. For
more information, refer to "Windows
EMS Management" in this chapter.
COM1
9600, 8, n, 1
VT100
HP ProLiant DL145 Server User Guide
continued