Linux Operating System Redirection; Windows Ems Management - HP ProLiant DL145 User Manual

Operating System Installation and Software
3. When POST shows the message
the ESC+4 keys on the remote keyboard. If the server has an administrator password
configured, the system prompts you to enter the password. If the server does not have a
password configured, the main screen of the BIOS Setup Utility appears.
To configure redirection after BIOS POST:
1. In the BIOS Setup Utility, press → to navigate to the Advanced menu.
2. Press ↓ to scroll to the BIOS Serial Console Configuration menu. Press the Enter key.
3. Press ↓ to scroll to the Redirection after BIOS POST option.
4. Do one of the following:
— Press + or - to toggle the settings.
— Press the Enter key. The Options box appears. Press ↓ or ↑ to select the appropriate
The available options include:
— Disabled—Turns off the redirection after POST
— Boot Loader—Redirection is active during POST and Boot Loader
— Always—Redirection is always active.
5. Press the Esc key to return to the previous screen or press the F10 key to save the
changes and exit Setup.

Linux Operating System Redirection

Linux operating systems provide text-based console access from the serial port. The
Management Processor supports operating system redirection so that an administrator can
connect the server serial port to the existing serial infrastructure and perform basic
management tasks.

Windows EMS Management

Windows Server 2003 provides text-based console access from the serial port. An
administrator can connect a laptop to the serial port and perform basic management tasks.
The Windows Emergency Management Services (EMS) Console, if enabled, displays the
processes that are running and allows administrators to halt processes. This capability can be
important in cases where video, device drivers, or other operating system features have
prevented normal operation and normal corrective actions.
To enable the Windows EMS Console:
1. In the BIOS Setup Utility, press → to navigate to the Advanced menu.
2. Press ↓ to scroll to the EMS Console Configuration menu. Press the Enter key.
5-24
setting. Press the Enter key to select the appropriate option.
Press <F10> if you want to run SETUP
HP ProLiant DL145 Server User Guide
, press