HP ProLiant DL145 User Manual page 64

Table 5-3: BIOS Setup Advanced Screen Menu Items
Primary Menu
Item
Management
Processor
Configuration
BIOS Serial
Console
Configuration
USB
Configuration
HP ProLiant DL145 Server User Guide
Sub Menu Items
Management
Processor Status
Clear Management
Processor Event Log
View Management
Processor Event Log
Set Serial Port
Sharing
Set LAN Configuration
Set PEF Configuration
Watch Dog Timer
Action
BIOS Serial Console
Serial Port Address
Serial Baud Rate
Flow Control
Redirection after BIOS
POST
Terminal Type
Send Carriage Return
Module Version
USB Devices Enabled
USB Host Controllers
Legacy USB Support
Operating System Installation and Software
continued
Default Value Comments
Shared Refer to the "Server Management"
section in this chapter.
Not Shared Refer to the "Server Management
"section in this chapter.
See Table 5-4, "LAN Configuration
Settings," immediately following this
table.
Disabled HP recommends this default setting.
Refer to the third-party IPMI Utilities
for further instructions.
Disabled Allows the Management Processor
to reset or power down the system if
the operating systems crashes or
hangs.
Enabled This option must be enabled for
BIOS redirection. For more
information, refer to "BIOS Console
Text Redirection" in this chapter.
COM1
9600, 8, n, 1
None
Disabled
VT100
Enabled
None
Enabled
Enabled
5-9