Eide Hard Drive Installation - HP ProLiant DL145 User Manual

EIDE Hard Drive Installation

The server supports up to two hard drives.
To install a hard drive:
1. Power down the server. Refer to "Powering Down the Server" in Chapter 2, "Server
Operations."
2. Extend the server from the rack. Refer to "Extending the Server from the Rack" in
Chapter 2, "Server Operations."
3. Remove the access panel. Refer to "Removing the Access Panel and the Chassis
Stiffener" in Chapter 2, "Server Operations."
4. Remove the chassis stiffener. Refer to "Removing the Access Panel and the Chassis
Stiffener" in Chapter 2, "Server Operations."
5. Remove the DVD drive or media bay blank. Refer to the "Installing a DVD Drive"
section earlier in this chapter.
6. Remove the drive tray. To locate the drive tray, refer to "Server Component
Identification" in Chapter 1.
Figure 4-16: Removing the drive tray
HP ProLiant DL145 Server User Guide
Hardware Options Installation
4-11