Placing External Calls; Redialing A Number - Mitel 5320e User Manual

Placing External Calls

The following sections describe features used when placing external calls.
To place an external call:
1. Press the Outgoing button, an unlit Call Key button, or enter the Outgoing Call access
code (8 is the default code).
2. Dial the number.
Note: If you cannot place an external call because all outgoing lines are busy, you can
request a callback, which prompts the system to contact you when a line becomes
available. See "Requesting a Callback (Queuing the Phone)" on
S
If you are prompted for an account code (indicated by a single beep), you must enter
an account code before you can place your call. See "Using Account Codes" on
page 52.
Depending on system configuration, you may also be able to use one of the following methods
to select an outgoing line:
• Enter the Select Line Group feature code. The default codes are 92001 to 92208.
• Enter the Automatic Route Selection (ARS) feature code. The default code is 92000.
Contact your system administrator for more information about using Select Line Group or ARS
access codes.

Redialing a Number

You can quickly redial the last external number dialed. You cannot redial extension numbers.
To use Redial:
With or without the handset lifted, press
and dials the number.
Answering and Placing Calls
(Redial). The system automatically selects a line
page 46.
47