Mitel 5320e/5330e/5340e User Guide
Using a Headset
When using a headset, press
icon
appears when the headset is in use. You cannot use the handset or speakerphone
when the IP phone is in Headset Mode. Disconnecting the headset automatically enables the
handset.
Note: The headset must be hearing aid compatible (HAC).
If your headset has a power-saver mode, make sure the system administrator has enabled the
"Headset Connect Tone" feature. If this is not enabled, you may miss the first few seconds of an
S
incoming call.
To connect and activate the headset:
1. Insert the headset jack into the Headset port
2. Dial 317 (Headset on/off). HEADSET MODE ON appears.
Note: Because Headset Mode disables the handset and speakerphone, you must
turn off Headset Mode before you can use the handset or speakerphone.
To turn off Headset Mode and activate the handset and speakerphone:
Dial 317 (Headset on/off). HEADSET MODE OFF appears.
12
(Speaker) to connect to or disconnect from calls. The Headset
located on the back of the IP phone.