Answering Calls; Placing Ad Hoc Conference Calls; Placing Emergency Calls; Viewing And Responding To Messages - Mitel 5330e Quick Reference Manual

Answering Calls

Lift the handset, or press
call while using a headset or to answer a call in
Handsfree Mode.

Placing Emergency Calls

Dial the emergency number (911 U.S. or
999/112 Europe). The system immediately places the
emergency call as soon as you dial the number, even
if you do not select an outside line.
Placing Internal (Intercom) Calls
With or without the handset lifted, dial the extension
number. If you enter incorrect digits, you can press
(Hold) to move the cursor backward, deleting
the last digits entered. If you are using Handsfree
Mode, listen for the double tone, and then begin to
speak.

Placing External Calls

Press the Outgoing button, an unlit Call button, or
enter the Outgoing Call access code (8 is the default
code), and then dial the number.
Redialing External Numbers
With or without the handset lifted, press the
(Redial). The system automatically selects a
line and dials the number.

Transferring Calls to Other Extensions

1. While on the call, press
enter the extension number.
2. Do one of the following:
•
Wait for an answer, announce the call, and then
hang up. If the extension is unavailable, press
the flashing IC or Call button to return to the
caller.
•
Hang up to transfer the call and disconnect the
call from your IP phone.

Forwarding Calls

1. Press the Fwd button, and then enter the feature
code, if applicable. ENTER FORWARD DEST
appears.
2. Enter the extension number, or press the Outgoing
button or enter the Outgoing Call access code (8 is
the default code), and then dial the telephone
number.
Mitel 5330e Quick Reference Guide (Mitel 5000 Communications Platform)

Placing Ad Hoc Conference Calls

(Speaker) to answer a

Viewing and Responding to Messages

Using Do-Not-Disturb
(Transfer), and then

Placing a Page Announcement

- 3 -
1. While on the first call, press the Conf button to place
the call on hold. CALL NEXT PARTY TO CNF
appears.
2. Place a call to the next conference party. For external
calls, press the Outgoing button or enter the
Outgoing Call access code (8 is the default code),
and then dial the number.
3. After the party answers, announce the conference,
and then press the Conf button to place the call on
hold. If necessary, repeat this step to add the
remaining conference party.
4. Press the Conf button again to start the conference.
CNF IN PROGRESS appears.
1. With the handset on-hook, press
Messages are displayed as first in/first out. If there is
more than one message, you can repeatedly press
(Message) to scroll through the messages.
2. When the desired message is displayed, press #, or
lift the handset for privacy, and then press # to
respond. (If your handset is off-hook and you press
[Message], you automatically place a call to the
party or message center who left the message.)
1. Press the DND button, and then do one of the
following:
•
Press (Up) or
the messages.
•
Enter the two-digit number for the DND
message.
2. If applicable, enter the additional text for the DND
description.
3. Press (Speaker), or lift and replace the handset.
1. Press 7.
2. Enter the page-zone number (0 to 9).
3. After the tone, make your announcement, and then
hang up.
(Message).
(Down) to scroll through