Overview - Mitel 5320e User Manual

Overview

Note: The cordless devices are supported by the 5330e/5340e IP Phones only. The
5320e IP Phone does not support a cordless module or cordless devices.
You can use the cordless handset and cordless headset to move around within your office or
adjacent offices. The cordless headset and handset are optional accessories, ordered
separately. For more information, contact your system administrator or local Mitel provider. Both
cordless devices connect to your IP phone through the cordless module, which attaches to the
back of the IP phone. The cordless headset rests and recharges in a headset cradle that
attaches to the side of the IP phone. The cordless handset recharges in the handset cradle.
The Cordless Devices Application provides access to the configuration settings and information
screens that apply to the cordless module and accessories. For more information, see "Pairing
the Cordless Module and Devices" on
The cordless module is shown here. The IP phone features are explained below.
Feature
1 – Cordless Module
2 – Cordless Headset
3 – Cordless Headset
Charging Cradle
4 – Cordless Handset
Charging Cover
5 – Cordless Handset
page 99.
Attached to the back of the IP phone, the module contains a light-emitting
diode (LED) indicating that a cordless device is in use; also indicates the
pairing of module and a cordless device.
Cordless handsfree operation for calls. If you are using the cordless
headset, you do not need to use the handset.
Provides power to recharge the cordless headset battery.
Provides power to recharge the cordless handset battery. Replaces the
cover supplied with the IP phone for corded handsets.
Cordless operation for handset calls. (You can transfer from the IP phone
handset to the cordless headset at any time.)
Cordless Devices
Function
97