Table of Contents
Advertisement
NAVI™ BARS NAVIGATOR
Timer setup
• First, select Channel List with cursor left /cursor right.
• Then, step to Channel to select the desired TV/Radio channel.
• Set the date using the numerical buttons (yy/mm/dd).
• If you enter a wrong digit you can erase it with cursor left.
• Set the start and stop time using the numerical buttons.
The different start times may never overlap each other. If you try
to enter a start or stop time within an already occupied period of
time you will get a warning message about it.
• Press select to save the timer or back to cancel.
• Press back twice to leave the Navigator and return to viewing
mode.
• Press
to put the Mediamaster in standby.
Up to 8 different events can be predefined. The events will be
sorted in start time order.
You can erase a predefined event by pressing cursor right.
• Press back to cancel the deletion and select to delete the
event.
Control folder
If you have to contact your service provider or a service centre,
they might ask for information available from this menu.
This gives general information about which hardware and soft-
ware version your Mediamaster is running on.
Control folder
From these menus you will get information related to your Serv-
ice Provider.
☛
System info
☛
CA Menu and Viaccess
GB 27
Advertisement
Table of Contents
