Dear customer, Congratulations on your new NOKIA Mediamaster 211 S. Plug & play installation and the user-friendly menu NOKIA NaviBars make this digital receiver particu- larly powerful and easy to use. The instructions for use include interesting tips on handling your digital receiver as well as extensive information on the special Premiere functions.
Satellite dish The satellite dish must have an unobstructed path to the satel- lites. Install the satellite dish according to the instructions. If you already have a satellite dish installed, note that you will need a Universal LNB which works on the frequencies 10.70- 12.75 GHz to be able to handle digital signals.
One antenna/one LNB configuration Select this alternative if you have one (1) LNB mounted on the antenna. • Press opt to view the predefined channel. LNB type Select the correct LNB type for your configuration. The most common values, including Universal LNB, can be selected us- ing the cursor left/cursor right button.
Nokia operates a policy of continuous development. Therefore we reserve the right to make changes and improvements to any of the products described in this manual without any prior notice.
Nokia Corporation, Nokia Home Communications (“Nokia”). The Agreement authorizes You to use the Software specified in Clause 1 below and which is included in this Nokia digital TV receiver. This is an agreement on end-user rights and not an agreement concerning sale.
Nokia. Your end-user rights automatically and immediately terminate without notice from Nokia if You fail to comply with any provision of this Agreement. In such an event, You must immediately return at Your own cost, this Nokia digital TV receiver, and all related material to the place of purchase.
• Do not allow the unit to be exposed to hot, cold or humid conditions. • Service should only be carried out at a Nokia Authorised Service Centre. • Please note that the only way to completely isolate the Mediamaster from the...
Remote control This section describes how to operate the Mediamaster using the buttons on the remote control. The stand-by button has double functionalitys. One function is performed if you gently press the button once and the other function is performed if you hold the button down for a few seconds. Some of the functions can also be performed using the buttons on the front panel.
Front and rear panel Front panel Slot for a CI module with a smartcard Button push the button to re- lease a CI module that has been inserted Function Stand-by Locked to channel Remote control feedback SW download Error Rear panel DIGITAL AUDIO RCA connector S/PDIF digital out-...
Service Provider. Note: CI modules and smartcards are only distributed by Serv- ice Providers and special distributors, not by Nokia. After inserting a card, leave it in the slot permanently. Do not re- move it again, unless you are asked to do so. This is important, for example, if your Service Provider wants to download new in- formation to the smartcard, as the card has to be in the slot.
Installation of the Mediamaster The Mediamaster box should contain the following items: • the Mediamaster • a remote control with 2 AAA batteries • a SCART cable (fully connected 1.0 metre) • a mains cable • an owner’s manual with the software license agreement About the SCART sockets The rear panel of the Mediamaster contains 2 SCART sockets (see diagram).
• Connect the TV aerial to the RF input socket on the analogue receiver. In order to switch the signal from the dish between the ana- logue and digital receivers, you will need a Nokia smart switch (at A B in the diagram) or a Universal Twin LNB. Nokia smart switch •...
Installation of the Mediamaster Connecting a HiFi system • Connect an RCA stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your HiFi system. • If available, you can connect a single RCA cable from the DIG- ITAL AUDIO socket on the Mediamaster to a HiFi system that is equipped with digital audio input.
First time installation General information Once you have correctly connected the Mediamaster, you will also have to perform a “First-time installation.” During this pro- cedure, helpful information is displayed at the bottom of the menus. Please note! The select button always confirms a selection within these menus, and pressing it will take you to the next step in the instal- lation process.
First time installation One antenna/one LNB configuration Select this alternative if you have one (1) LNB mounted on the antenna. • Press opt to view the predefined channel. LNB type Select the correct LNB for your configuration. The most common values, including Universal LNB, can be selected using the cur- sor left/cursor right button.
First time installation Typical connection of a two-way DiSEqC switch: • Connect the cable from the LNB that is intended for channels from the ASTRA satellite (or THOR) to the connector marked LNB 1 (A) on the switch. • Connect the cable from the HOTBIRD satellite (or SIRIUS) to the connector marked LNB 2 (B).
• From the “Antenna/Satellite selection” menu select option 3 “Motor Antenna Configuration” and press select. Type of motor • Select SATSCAN (ASTRA) if you have a Nokia SatScan motor. • Select DiSEqC (Hotbird) if the motor that you have is control- led by DiSEqC commands.
First time installation Remove limits If you need to remove the limits. When you activate this command, the motor will turn itself to the 0° (Zero) position. However, the next time you select a channel, the motor will turn to its proper position. Channel search The Channel search procedure can be carried out in different ways.
First time installation Advanced manual search The information that must be entered in this menu is available in satellite TV magazines or on the Internet. You can use this menu if you are looking for some “special” chan- nels (i.e. non-DVB standard channels) which might only be found when you have entered the necessary settings here.
NaviBars General information • Press select to open the NaviBars. The NaviBars is used for selecting TV/Radio channels and chang- ing system settings. See the figure to the right. The horizontal row contains folders, for example, All TV, Set- tings and so on. Their names are shown in black text at the bot- tom of each folder.
NaviBars ☛ Control folder User preferences Banner time-out When you switch channels, an information banner will be shown for a few seconds. You can select the length of time that the banner will be shown. Volume bar Select whether or not you want the volume bar to appear on the screen when you change the volume.
NaviBars Important information about editing channels Before you start, you must select the list, TV or radio, that you want to edit. If you are watching TV and press select and choose Edit channels, you can only edit TV channels. If you are listening to radio channels you can only edit radio channels.
NaviBars Delete list If you want to delete a Favourite list, select the list using the cur- sor left/cursor right button and press select. Rename list You can give an existing list a new name by following the instruc- tions in the “How to give a specific name” section on page 19. Rearrange lists If you have created several Favourite lists, you can determine the sequence in which the lists will appear.
NaviBars Lock channels To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory. You can lock (and later unlock) channels on any of the lists in or- der to prevent, for example, your children from watching.
NaviBars • You can adjust the dish using channel preview if PID informa- tion has been entered. • Press select to start the channel search. • When you get the message on the screen that ”you have found X new TV-channels and X new radio channels”, press select to save the new channels.
NaviBars ☛ Control folder Timer General You can program the Mediamaster to switch on and off at predefined times. The timer function is very useful when you want to record a pro- gramme and you are unable to start/stop the recording event yourself, or when you just want to be reminded of the start of a programme that you do not want to miss.
Time Installation. Please refer to page 19. Update channels via a PC On the Nokia web site (www.nokia.com) you can download a Windows™ software for updating the channel lists via the serial port. The serial port connector can be found on the back of the Mediamaster (see page 10) .
NaviBars Picture format If you have a TV set with a 4:3 picture format and the transmis- sion is 16:9, you can select “Fullscreen” or “Letterbox”. Fullscreen will fill the screen but some information on the left and right sides will be cut off. Letterbox will give a complete picture, but black areas will be vis- ible at the top and bottom of the screen.
New software may include new or improved features for exist- ing menus. Please check for the latest updates for your receiver at Nokia’s website (www.nokia.com). Enter this menu to check if a new software version is available.
Viewing Mode General information The following describes the basic functions of your Mediamaster that can be used while watching satellite TV or listening to sat- ellite radio. Some of the functions described here are dependent on the Service Provider and can only be used if they are included in the transmitted programme information.
Viewing Mode Extended programme information The Mediamaster can display information about programmes that are currently being broadcasted as well as those that will be broadcast next. This procedure is the same for both TV and radio mode. By pressing info while watching TV the “Programme informa- tion”...
Viewing Mode Premiere specific functions Premiere offers special functions for some channels. You can, for example, select between various camera perspectives or matches when you are watching sports programmes, such as Formula 1 Grand Prix or football league games (Multifeed). On PREMIERE DIREKT channels, you can select the start times of the movies that you order.
Viewing Mode TV release (0) With the 0 button you can toggle between analogue terrestrial TV, video, and analogue and digital satellite TV signals. Teletext Pressing txt will open a teletext page (if teletext is transmitted on that channel.) Select teletext pages using the numeric buttons on the remote control.
Glossary of terms AC-3 A multichannel digital audio encoding system. Access Access to options in the Settings folder is protected by an access code. In addition, parents may lock individual programmes using the channel editing function. Access code A four-digit code stored in the Mediamaster. It is used to lock/unlock the Mediamaster, folders and programmes.
Troubleshooting Problem The LED on the front panel does not light up/is not lit. The left-hand LED is red No sound or picture. No sound or picture on the horizon- tal modulated transponder. Bad picture/blocking error. There is no Welcome menu on the screen after you have switched the Mediamaster on for the first time.
Technical specifications Transmission standards DVB, MPEG 2 LNB / Tuner input Connector 1x F-type (LNB) RF input frequency 950-2150 MHz RF input power level -20 to -65 dBm Supply voltage 13 /18 V ± 5% Max. current 500 mA, overload protected Control voltage 22 kHz, 0.65 V DiSEqC...
Menu screen structure First time installation Language preferences Antenna/satellite selection “First time Deutsch One antenna/One LNB config installation” English Multisatellite/DiSEQqC Switch config menu Turhish Motor antenna configuration Italiano NaviBars System information Hardware version System software Boot software version Timer setup Timer list Channel list __/__/__ -:- -:-...
Nokia is a registered trademark of Nokia Corporation www.nokia.com 00000318.01...