Channel Search - Nokia Mediamaster 210 Owner's Manual

FIRST TIME INSTALLATION
Remove limits
In case you need to remove limits.
When you perform this command the motor will also turn itself
to the 0° (Zero) position.
However, next time you select a channel the motor will turn to its
proper position.

Channel search

The Channel search procedure can be performed in different
ways.
The menu will look different depending on what option you se-
lected in the "Antenna/satellite selection" menu.
If you selected "One antenna/one LNB configuration" you just se-
lect "Automatic", "Manual" or "Advanced Manual" search.
If you selected "Multisatellite/DiSEqC switch configuration" or
"Motor antenna configuration" you also have to set which satel-
lite to search from, using cursor left/cursor right.
Automatic search
If you selected "One antenna/one LNB configuration" or
"Multisatellite/DiSEqC switch configuration":
• Press select to start searching for channels.
If you selected "Motor antenna configuration":
• Select predefined channel and then adjust the motor (if neces-
sary) with cursor left/cursor right.
• Press select to start searching for channels.
Manual search
The information you need to enter in this menu is available in
magazines covering satellite TV reception or on the Internet.
Transponder frequency: Specify the frequency in MHz with the
numeric buttons. If you enter the wrong value, erase with cursor
left.
Polarisation: Select Horizontal, Vertical, Circular left or Circular
right.
Symbol rate: Enter with the numeric buttons. If you enter the
wrong value, erase with cursor left.
Network search: Select "Yes" if you want to search on all trans-
ponders connected to a specific network.
Adjust motor: This alternative will only be visible if you have made
a motor antenna configuration. Adjust (if necessary) the motor for
the current satellite.
• Press select to start searching for channels.
Video, Audio and PCR PID
These alternatives will only be visible if you are searching from an
user defined satellite. By entering these values you can see TV
picture on the background which may help you in adjusting the
dish.
GB 19