Table of Contents
Advertisement
Power Spot 575IE II™
4. MOUNTING AND INSTALLATION
Mounting
The POWER SPOT 575IE™ is fully operational in two different mounting
positions, hanging upside from a ceiling or set on a flat level surface. To avoid
internal damage to the unit, never mount the unit on its side as illustrated below.
Be sure this fixture is kept at least 0.5m away from any flammable materials
(decoration etc.). Install a safety cable that can hold at least 10 times the weight of
the fixture. Never use the carrying handles for secondary attachment.
Clamps
The P O WE R S P O T 575IE ™ has been designed to hold multiple clamps to
the bottom of the unit in several different orientations. Always use an
appropriately rated clamp to mount this unit to truss. Refer to the printed
instructions on the bottom of the fixture for proper clamp installation.
a) C am loc k S y s tem : This system allows a quick and efficient means to
secure a clamp to the unit. To attach a clamp to the unit, attach a clamp
©Elation Professionals® Los Angeles, Ca.
R efer to regulations B G V C 1 (form erly V B G 70) and D IN V D E
0711-217 for proper ins tallation in E urope
To ens ure proper ins tallation, only qualified s taff s hould attem pt
ins tallation.
-
wwww.ElationLighting.com
12
-
Page
Advertisement
Table of Contents
