Table of Contents
Advertisement
Power Spot 575IE II™
that is rated to handle the weight of the unit to your cam lock. After a
clamp has been attached to the cam lock, attach the cam locks to the
designated position on the bottom of your unit. Lock the cam locks into
position by turning the wing nuts 90°.
b) Be sure to always use two cam locks mounted to the bottom of unit to
ensure safe truss mounting (each two opposite threads max. M10x20).
Secure the POWER SPOT 575IE II™
Regardless of the rigging option you choose for your P O WE R S P O T 575IE II™
always be sure to secure your fixture with a safety cable. The fixture provides a
built-in rigging point for a safety cable on the underside of the fixture, be sure to
use this point and never secure a safety cable to a carrying handle.
©Elation Professionals® Los Angeles, Ca.
4x M10x20mm
4x Camlock
-
wwww.ElationLighting.com
90°
13
-
Page
Advertisement
Table of Contents
