Table of Contents
Advertisement
Power Spot 575IE II™
9. LAMP REPLACEMENT
For a proper and safe lamp change, please read this chapter carefully and follow all
instructions.
9.1 S afety R egulations
• Pull out the main plug!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Don't touch the bulb of the lamp with bare fingers (this can cause damages.
• Before you put the POWER SPOT 575IE™ into operation close the casing,
otherwise your retina can be hurt!
9.2 Lam p C hange
Be sure the unit is disconnected from it's main power supply.
Always allow ample time for the unit to properly cool before attempting any type of service
or repair..
To expose the lamp, remove the four Philips screws that secure the lamp socket assembly
©Elation Professionals® Los Angeles, Ca.
-
wwww.ElationLighting.com
36
-
Page
Advertisement
Table of Contents
