Powering Off - Rimage DLN5200 User Manual

Rimage DLN5200/DL5200

Powering off

Powering off the Rimage DLN5200
1. Close all open applications.
2. To shut down the software, Windows, and the
embedded PC, briefly press the PC power button.
Caution: Do not press and hold the PC power
button. If you press and hold the PC power button,
the embedded PC will not shut down properly. This
may cause data loss or corruption.
Note: Power down takes approximately 30 seconds.
3. After waiting approximately 30 seconds for the PC to
power down, press the main power switch to power off
the DLN5200.
Power off the Rimage DL5200
1. Close all open applications.
2. Press the main power switch to power off the Rimage DL5200.
Note: When you start the Rimage DL5200 again, you must first power on the
and then power on the attached computer so the recorders are recognized.
10
PC Power Button
DL5200
110768_D