Key Touch (Key Touch Setting); Fx1 Depth (Fx1 Effect Balance Setting); Fx2 Depth (Fx2 Effect Balance Setting); Fx1 Type (Fx1 Effect Type Selection) - Korg SGPROX Owner's Manual

High note damp
PIANO
In the high note range of A6 and above, notes will always sound as though the damper pedal
were being pressed, regardless of the actual operation of the damper pedal.
NORMAL Even in the high note range of A6 and above, notes will sound in the same way as lower
notes (i.e., they will decay more slowly while the damper pedal is pressed).

6. KEY TOUCH (Key touch setting)

This parameter specifys how the force with which you play the keyboard will affect changes in volume and
tone. With positive (+) settings, your playing dynamics will produce greater change in volume and tone.
With negative (–) settings, the volume and tone will be constant, regardless of your keyboard playing dy-
namics.
Range of settings
Factory setting

7. FX1 DEPTH (FX1 effect balance setting)

This parameter sets the balance between the original sound and effect 1. With a setting of FX, only the effect
will be heard. However if no effect is selected for FX1, the display will indicate "NO EFFECT."
Range of settings
When "Hyper Enhancer" is selected as the FX1 effect type,
only "DRY" or "FX" can be selected.

8. FX2 DEPTH (FX2 effect balance setting)

This parameter sets the balance between the original sound and effect 2. With a setting of FX, only the effect will
be heard. However if no effect is selected for FX2, the display will indicate "NO EFFECT."
Range of settings

9. FX1 TYPE (FX1 effect type selection)

This parameter selects the effect type for FX1.
You can choose one of 12 types: Reverb, Early Reflection,
Stereo Delay, Stereo Chorus, Stereo Flanger, Overdrive, Ste-
reo Phaser, Rotary Speaker, Auto Pan, Wah, Flanger-Delay, and Hyper Enhancer. (Refer to Effects

10. FX1 PARAM (FX1 effect parameter settings)

These settings adjust the parameters for the effect that you
selected for FX1 TYPE. The type of parameters and the range
of each parameter will depend on the selected effect type.
(Refer to Effects,
p.50)
However if "NO EFFECT" is selected for FX1, no parameters will be displayed.

11. FX2 TYPE (FX2 effect type selection)

This parameter selects the effect type for FX2. Eleven dif-
ferent types are available: the same as for FX1 with the ex-
ception of Hyper Enhancer. (Refer to Effects

12. FX2 PARAM (FX2 effect parameter settings)

These settings adjust the parameters for the effect that you se-
lected for FX2. The type of parameters and the range of each
parameter will depend on the selected effect type. (Refer to
Effects,
p.50)
However if "NO EFFECT" is selected for FX2, no parameters will be displayed.
–99 to +99
+00
DRY, 99:01 to 01:99, FX
DRY, 99:01 to 01:99, FX
p.50)
Program Edit mode
The display when No Effect is selected for FX2
The display when No Effect is selected for FX2
The display when No Effect is selected for FX2
p.50)
35