Changing The Velocity Curve Of The Keyboard; Changing The Operation Of The Pedals; Lcd Page Display Mode Setting; Other Settings - Korg SGPROX Owner's Manual

Changing the velocity curve of the keyboard

1. Press the GLOBAL switch (The LED will blink) and you will enter Global mode.
2. In the VEL CURVE page (select switch 10), you can change the velocity curve (
This setting will remain even if the power is turned off.
* Velocity refers to the way in which your playing dynamics will affect the volume or tone.

Changing the operation of the pedals

1. Press the GLOBAL switch (the LED will blink) and you will enter Global mode.
2. In the DAMP.P POL and ASGN. SW POL pages (select switches 5 and 6) you can change the polarity
of the pedals ( p.28).
This setting will remain even if the power is turned off.

LCD page display mode setting

1. Press the GLOBAL switch (the LED will blink) and you will enter Global mode.
2. In the PAGE MEM page (select switch 14), you can change the page memory setting and power-on
mode setting. ( p.30)
This setting will remain even if the power is turned off.

Other settings

Press the GLOBAL switch (the LED will blink) and you will enter Global mode.
• The system name (the title that is displayed for a few seconds when the power is turned on) can be
changed in the SYS NAME page (select switch 15). (
• MIDI-related settings can be made in the pages called up with select switches 1 to 4. (
• The functions of the assignable controllers in Program mode can be specified in the CONTROLLER
page (select switch 9). (
• Pedals and controllers etc. can be calibrated in the CALIB page (select switch 16). (
* Calibration adjustments allow you to optimize the range and sensitivity of the pedals and controllers.
All of the above settings will remain even when the power is turned off.
Press the PROG EDIT switch. (The LED will light) and you will enter Program Edit mode.
• The scale type (transposition) can be changed in the SCALE page (select switch 13). (
• After modifying a program, you can bring back the sound of the original program by using the PRELOAD
page (select switch 14). (
The above settings will return to the settings of the original program when you re-select a program or turn
off the power. If you wish to keep the settings that you modified, refer to "Saving a sound that you create"
( p.20).
p.29)
p.36)
Trying out the functions
p.31)
p.29).
p.27)
p.31)
p.36)
21