Trying Out The Functions; Editing A Basic Sound; Modifying The Effects; Saving A Sound That You Create - Korg SGPROX Owner's Manual

Trying out the functions

This section will provide a simple explanation of the major functions of the SGproX:
Program Edit mode and Global mode.
For a detailed explanation, refer to the section for each mode.

Editing a basic sound

1. Press the PROGRAM switch, and use the select switches and the BANK switch to select a program.
2. Press the PROG EDIT switch (The LED will light) and you will enter Program Edit mode.
3. Use select switches 1 to 6 to choose pages that will allow you to modify the sound (
Be aware that editing on the SGproX does not allow you to make drastic changes in the sound. For example,
your edits can make a piano sound brighter, or slow down the attack of a note, etc.
If after modifying a sound, you select another program or turn the power off, the sound will revert to the
original program.
If you wish to save the modified sound, refer to Saving a sound that you create (

Modifying the effects

1. Press the PROGRAM switch, and use the select switches and the BANK switch to select a program.
2. Press the PROG EDIT switch (The LED will light) and you will enter Program Edit mode.
3. The pages of select switches 7 and 8 allow you to adjust the depth of effects 1 and 2 (
4. Use select switches 9 to 12 to choose pages that allow you to modify the type of effects 1 and 2 and modify
their settings. If you change the effect types here, the settings of pages 7 and 8 will also change.
For details on effect types and parameter settings, refer to Effect (
The effect settings that you have modified here will revert to the effect settings of the original program if you
select a different program or turn off the power.
If you wish to save the modified effect settings, refer to Saving a sound that you create (

Saving a sound that you create

1. Press the GLOBAL switch (The LED will blink) and you will enter GLOBAL mode.
2. Use select switch 12 to choose the page that allows you to turn PROG PROTECT "OFF".
3. Press the GLOBAL switch (The LED will turn off) and you will to return Program Edit mode.
4. In Program Edit mode, modify the sound or effect settings.
5. Use the WRITE page (select switch 16) to write the modified data into memory.
It is also possible to write the modified program into a different program number.
For details refer to 16. Write of Program Edit mode (
When you write data, the program that previously occupied that memory will be erased.

Modifying the name of a program

1. Press the GLOBAL switch (The LED will blink) and you will enter Global mode.
2. Use select switch 12 to choose the page that allows you to turn PROG PROTECT "OFF".
3. Press the GLOBAL switch (The LED will turn off) and you will return Program Edit mode.
4. In the RENAME page (select switch 15), you can use AL1 to 4 to modify the name.
For details refer to 15. Rename of Program Edit mode (
20
p.20).
p.50).
p.37).
p.37).
p.34).
p.35).
p.20).