Preparing To Play - Korg SGPROX Owner's Manual

Introduction
• Before you play the SGproX, please read the sections of this manual entitled Safety Precautions, To
avoid personal harm by fire or electric shock, Cautions and Warnings.
• In this owner's manual, text printed in square brackets
panel of the SG proX. Text printed in double quotation marks " " indicates items which appear in the
LCD.
• In this manual, the

Preparing to play

1. Check the included items
Make sure that the following items are included with your SGproX.
• AC cable
• Music stand (Assembly
2. Location
Place the SGproX on a stable base or stand so that it will be easy to play.
3. Connect the monitor speakers etc.
In order to fully enjoy the sound of the SGproX, use two powered monitor speakers (left and right), and
connect them to the rear panel L/MONO and R jacks.
If you have only one powered monitor speaker, connect it to the L/MONO jack. In this case, do not connect
anything to the R jack.
4. Connect the power cable.
Connect the AC power cable to the input jack of the SGproX.
Connect the other end of the cable to an AC outlet.
Be sure to use an AC outlet of the appropriate voltage for your instrument.
Before doing so, turn off the power of the SGproX and of the monitor speaker system etc.
When using headphones
Connect the headphones to the jack located on the front left of the SGproX.
In this case, the output from the OUTPUT jacks will not be canceled.
Use the VOLUME slider to adjust the volume.
When using headphones, protect your hearing by avoiding prolonged use at high volumes.
When using the music stand
For assembly, refer to "assembly the music stand" (
When using the music stand, insert it firmly all the way into the holes located on the rear panel.
10
symbol indicates a warning, and the
p.68)
indicate items which are printed on the front
symbol indicates a page reference.
Included items
AC cable
p.68).
Music stand
(Assembly)