Now (Table With Current Programme Contents); Next; More - TechniSat DigiCorder T1 Operating Manual

(Fig. 7-16)
(Fig. 7-17)
(Fig. 7-18)
> Press the SFI key on the remote control of the digital
receiver.
The electronic programme guide will be displayed on
screen (Fig. 7-16). The display will show either the
current programmes of the channels selected by you,
or those included in the ex factory pre-programming
(see also Point 8.2). You can now use the SFI func-
tion to obtain information on the contents of various
programmes.
You can also use the SFI functions to select a pro-
gramme for viewing, to mark a programme for later
viewing, or to include it in timer programming.

7.14.4 Now (table with current programme contents)

Initially, the SFI table "Now" (Fig. 7-16) will be displayed, sho-
wing programmes currently being broadcast. The yellow bar
to the right of the programme name indicates the elapsed
broadcast time of the current programme. The programme
currently selected is highlighted.
> Use the up/down arrow keys to move the marker one
line at a time. Use the left/right arrow keys to move
the marker one page at a time (paging).
> You can now utilise the SFI functions (Point 7.14.3).
> Press the yellow function key to move to the SFI
table "Next" (See Point 7.14.5)
or
> press the TV/Radio key to revert to normal operation.

7.14.5 Next

> Use the yellow function key to display the table
"Next" (following programmes) (Fig. 7-17).
> All the SFI functions are available (Point 7.14.3).
> Press the yellow function key to move to the SFI
table "More" (Point 7.14.6)
or
> Press either the green function key or the Back key
to revert to the previous SFI table "Now"
or
> Press the TV/Radio key to revert to normal operation.

7.14.6 More

> By pressing the yellow function key again while the
SFI table "Next" is displayed you can move to the SFI
table "More". (Fig. 7-18)
This table displays an additional time window in the
title line. This time window shows the current time of
the SFI table displayed.
> Press the yellow function key to page further through
the programme in the time steps indicated in the yel-
low colour bar.
> Keep the yellow function key pressed down to conti-
nue paging. A clock will be displayed to facilitate the
search.
26