Interrupting The Import Procedure; Calling The Electronic Programe Guide; Now (Table With Current Channel Contents); Later - TechniSat DigiCorder K2 Operating Manual

49773_DigiCorder_K2_EN.qxd
The import process is indicated by Load SFI displayed on the screen. This function is not
carried out, if your device is being used at this time.
The download process can be manually started immediately after swiching off
(whilst Load SFI?? is displayed) by pressing the SFI key. Loading SFI is displayed on
the screen during the download process as well as percentage of the already downloaded
SFI data (e.g. 38%). The import duration depends on the number of imported programs.
A maximum of seven days can be displayed in advance. This period is reduced with increa-
sing number of programs in the electronic program guide, due to the data quantity.
You can decide which programs you want listed in the "electronic program guide". You can
select them as described in Sections 9.2.4 and 9.2.5.

7.16.2 Interrupting the import procedure

The download can be interrupted by pressing the On/Standby key on the digital receiver.
Only the SFI data from the last update will be available.

7.16.3 Calling the electronic programe guide

> Press the SFI key on the remote control of the digital receiver.
The electronic program guide will now be displayed on the screen. The programs that
you selected or those set in the factory under the selected start category Summary
(Section 9.2.6) start category will be displayed together with the current broadcast
(see Section 9.2) as well. You can now use the the SFI function to read the informa-
tion provided on the various broadcasts.
You can also use the SFI functions to switch to another broadcast, mark it or enter it
in the Timer program

7.16.4 Now (Table with current channel contents)

Zunächst wird The SFI table "Now" iis first displayed with the currently broadcast programs.
The yellow bar on the right next to the program name displays the<past broadcast time of
the current program. The currently set program is marked.
> You can move the mark through the lines using the arrow keys up/down.
> Press the left/right arrow keys to move the mark sideways (scroll).
The SFI functions (Section 7.16.7) are now ready for use.
> Press the yellow control key to jump to the SFI "Later" table (see Section 7.16.5)
or
> Press the TV/Radio key to return to standard operation.

7.16.5 Later

> Use the yellow control key, when the SFI "Now" table is switched on, to call the
"Later" table (following broadcasts).
The SFI functions (Section 7.16.7) are available.
> Press the yellow control key to jump to the SFI "More" table (Section 7.16.6)
or
1.11.2007 14:57 Str. 27
27