GRAPHTEC CS610 User Manual page 81

(7) After you have clicked tile number 6 (tile number 4 in the case of the CS510-06
model), click the Set button.
Click the [OK] button.
(8) To check the color correction results, click the
(9) The following message is displayed. Insert the color correction sheet in the scanner
as instructed.
Position the color correction sheet so that the red bar in the center of the sheet is
centered in the scanner (but with the printed side down).
(10) Click the [OK] button to start scanning.
After scanning has been completed, an enlarged view of the color-corrected data is
displayed.
(11) Click the Fit icon to display the entire image, and check whether there is any
discrepancy in color. If there is no discrepancy, color correction is complete. Click
the Close button.
If there is still some color discrepancy after performing Color Correction, repeat
steps (6) through (11).
CS610/CS510/IS210
5. DAILY MAINTENANCE
Confirm button.
5 – 13