GRAPHTEC CS610 User Manual page 74

5. DAILY MAINTENANCE
CS610 (documents thicker than 1.5 mm)
(1) Press the ITA key to switch the scanner to ITA mode (the ITA LED lights).
(2) Hold down the FORWARD key. The top cover will start to rise. The ITA LED flashes
while the cover is rising.
(3) When the ITA LED stops flashing, remove your finger from the FORWARD key.
(4) Switch off the scanner.
(5) Pull out the jammed document from the front or rear of the scanner.
Do not open the top cover while a thick document is loaded in the scanner, as this
may damage the document.
5 – 6
CS610/CS510/IS210