GRAPHTEC CS610 User Manual page 37

3. PREPARING TO OPERATE THE SCANNER
For manual setup
Select "Assign IP address", specify your desired IP address, and then click [Next].
Please contact your network administrator if you do not know your IP address. Two
or more identical IP addresses may cause network problems.
(9) Confirm the settings, and then click the [Execute].
(10) This completes the Device Setup operation.
Installing the Graphtec Network Utility
(11) Proceed to install the Graphtec Network Utility. Select [Yes], and then click [Finish].
3 – 10 CS610/CS510/IS210