GRAPHTEC CS610 User Manual page 5

Safety Precautions (Continued)
Be careful not to damage the power cord or the
interface cable and never use a damaged cord
or cable.
• Do not use unnecessary force to bend, pull, twist,
or bind the cord and cable, place a heavy object
on them, nor remodel them. Such actions could
result in scratches or damage to the cord or cable.
• Use of a damaged power cord or interface cable
may result in electrical shock or a fire hazard.
• Replace the damaged cord or cable with a new one.
When disconnecting the power cord or the inter-
face cable, do not pull on the cord/cable.
• Such action will damage the cord/cable, resulting
in a fire hazard or electrical shock. Be sure to hold
the power cord's plug or the interface cable's con-
nector.
Before disconnecting or reconnecting the power
cord, be sure to turn off the scanner.
• Failure to do so may damage the scanner's per-
formance and cause it to malfunction or break down.
• Failure to do so may result in electrical shock.
Before cleaning the scanner, be sure to unplug
its power cord from the electrical socket.
• Failure to do so may result in electrical shock.
Do not install, use, or store the scanner in a loca-
tion exposed to direct sunlight and/or the direct
draft of an air conditioner or heater.
• Such location may impair the scanner's performance
due to deformation or other damage and cause the
scanner to malfunction or break down.
CAUTION
Never damage or
use when damaged
Pulling prohibited
Turn off the Power
switch
Unplug the power
cord from the socket
Prohibited
– iv –