KVH Industries TracPhone FB250 User Manual page 94

Options for messages in the Sent folder
The Sent folder contains SMS messages that have been sent.
To access the Sent folder, select MESSAGES > Sent from the navigation pane.
The Status column shows the status of each message, if you have selected
Delivery notification when sending the message.
From the Sent folder you have the following options:
• Click Resend next to a message you want to send again.
When the Write message page opens, click Send.
The terminal now attempts to send the message again. To make sure the
message has been sent, look in the Sent folder. There should now be two
copies of the sent message.
• Click Forward next to a message you want to forward.
Type in the phone number of the new recipient and click Send.
The terminal now attempts to send the message to the new recipient. To
make sure the message has been sent, look in the Sent folder.
• Click Delete next to a message to delete it.
• Click Delete all sent messages to delete all the messages.
Sending an SMS message to the terminal
You can send an SMS message to the terminal e.g. from a mobile phone,
using one of the mobile numbers for voice. Dial
+ <Mobile number>
The first part of the mobile number is always 870, which is the "country code"
for the BGAN system. If the mobile numbers are listed in the web interface,
you can look them up as follows:
Select PHONE BOOK > Mobile numbers. If the mobile numbers are not listed in
the web interface, refer to your airtime subscription.
Note
There are two Voice numbers, one for 3.1 kHz Audio and one for
Standard Voice.
Chapter 4: Using the web interface
Handling SMS messages 81