Connecting The Ip Handset - KVH Industries TracPhone FB250 User Manual

Chapter 2: Getting started

Connecting the IP handset

Power supply
The IP handset is powered from the LAN interface, using Power over Ethernet.
Starting up the IP handset
The following procedure is for the TracPhone FleetBroadband IP handset. The
procedure may be different for another type of IP handset.
Note
The first handset that is connected to the LAN interface on the
terminal is automatically registered in the terminal and assigned the
local number 0501 and password 0501. For information on how to
connect additional handsets, see Connecting a new IP handset on
page 105.
Do as follows:
1. Connect the IP handset to one of the LAN (PoE) connectors on the terminal
as described in the user manual for the handset.
The handset starts up automatically.
2. If your SIM card requires a PIN and the PIN has not yet been entered in
the terminal, you can enter the PIN from the BGAN menu of the IP
handset.
To enter the PIN, select BGAN > Enter PIN from the handset menu system.
Note that this menu item is only available if the terminal is waiting for a
PIN. Then type in the Administrator user name and password followed by
the PIN for the terminal.
For further information on the IP handset, refer to the user manual for the
handset.
24 Connecting the IP handset