KVH Industries TracPhone FB250 User Manual page 121

Chapter 4: Using the web interface
Setting the call types for IP handsets
Do as follows:
1. Select SETTINGS > IP handsets > Call settings.
2. For each handset, select the call types you want to enable for incoming
and outgoing calls.
The call types are described in more detail in Selecting the call type on
page 39.
• For Incoming calls, you can check Standard or 3.1 kHz Audio or both.
If you check both, the handset will react (ring) on any incoming call.
If, for example, you select Standard, the handset will only react on
calls made to the Standard phone number.
• For Outgoing calls, you can select either Standard or 3.1 kHz Audio.
The selected type will be used by default, if possible, for any outgoing
call.
3. Click Apply.
108 Setting up the interfaces