KVH Industries TracPhone FB250 User Manual page 20

TracPhone terminal
Overview
Whether you have purchased a TracPhone FB500 system or a
TracPhone FB250 system, the terminal is basically the same. For this reason
this section covers both systems.
The TracPhone terminal is the controlling unit in the TracPhone system. It
contains all user interfaces and LED indicators and stores configuration data.
For information on how to install the terminal, refer to the installation manual.
Tools for setup and daily use
The IP handset can be used for displaying status and for entering the PIN code
for the terminal. The IP handset connects to the LAN interface of the terminal.
For information on how to use the handset menus, see the user manual for the
IP handset.
The built-in web interface is used for easy configuration and daily use. The
web interface is accessed from a computer connected to the terminal, using an
Internet browser. No installation of software is needed.
For further information on the web interface, see Chapter 4, Using the web
interface.
Main units
Chapter 1: Introduction
7