KVH Industries TracPhone FB250 User Manual page 135

Chapter 4: Using the web interface
The network classification table shows which devices are associated with
which LAN ports and network user groups. An Asterisk (*) is a "wild card",
meaning that any value is accepted.
2. Click Edit next to the entry you want to edit, or click Add at the bottom of
the list.
3. Click Add next to a network device you want to use, or type in the MAC
address manually at the top of the page.
Note
4. Select the LAN port and Network user group you want to associate with
the device.
Network user groups are created and defined in the Network user group
page. See Setting up the network user groups on page 113.
5. Click Apply.
122
If you leave a field empty, it is the same as a "wild card" and it
will be shown as an Asterisk in the Network classification table.
Unless you are using a Static IP address, the IP address field
should always be left empty.
Managing LAN network users