Handling waiting calls
Note
The phone must have an R key to be able to use these functions.
During a call, if a second party attempts to make contact with you, you may
hear a Call Waiting indication. The Call Waiting indication is two beeps and a
pause of 3 seconds, then two beeps again etc. If no action is taken, the waiting
call is released after a time out period.
In the web interface you can enable or disable the call waiting indication. For
further information, see Call waiting on page 100.
When you receive a Call Waiting indication, you have the following options:
If you want to:
Clear the current call,
and accept the waiting call.
Hold the current call,
and accept the waiting call.
Ignore the waiting call.
Reject the waiting call.
Note
The BGAN system only supports one external call at a time.
Do as follows:
Press R 1 #, within the time out period.
Press R 2 #, within the time out period.
Take no action.
Press R 0 #, within the time out period.
Using a phone or fax machine
Chapter 3: Operating the system
47